iUFCExport
Display and interact with DCS (Digital Combat Simulator) plane panels from your iPad
Check this video review by The Air Warfare Group to watch iUFCExport in action.
How to install and configure
1) Install the iPad application from the Apple AppStore or use Xcode to build the application from source
2) Install the Lua script on the PC where you installed DCS. Follow these instructions.
3) (Optional) If after installing everything as explained in steps 1 and 2, you can’t control DCS from your iPad, or you can’t see anything in the UFC displays on your iPad, you may have to do some additional configuration. Follow these instructions to configure the iPad application.
Latest version
1.8 (released on Apple AppStore on September 30, 2023)
Added support for F-15E UFC and for AH-64D Keyboard Unit.
Supported planes and panels
Non-obvious clickable zones are highlighted in red.
A-10C UFC
All buttons work, including “Master caution” reset.
“Master caution” light illuminates.
A-10C CMS
All buttons and displays work, except the brightness button.
To use the system switches, touch the bottom part to toggle between ON and OFF. Touch the upper part to activate the menu.
AH-64D Keyboard Unit (only for Pilot)
All buttons and displays work, except the brightness button.
F-15E UFC (only for Pilot)
All buttons and displays work, except the brightness button.
To use the system switches, touch the bottom part to toggle between ON and OFF. Touch the upper part to activate the menu.
F-15C ICP
All buttons work, except for the volume rotaries.
The lower and higher half of the volume rotaries are used to decrement / increment the preset radio channels.
F-16C CMS
All buttons and displays work, except the GO/NOGO lights.
F/A-18C UFC
All buttons, switches and rotating buttons can be used.
All displays are sync’ed with DCS.
F/A-18C CMS
All buttons work.
Note that the RWR panel is NOT implemented yet!
AV-8BNA UFC and ODUs
All buttons and rotating buttons can be used, except:
- the 2 volume buttons
- the brightness button
All displays are sync’ed with DCS.
JF-17 UFCP
All buttons can be used, except the 4 potentiometers at the bottom.
All displays are sync’ed with DCS.
AJS 37 CK 37 and waypoints panels
All buttons can be used, except for the RENSA button and its guard.
All displays are sync’ed with DCS.
AJS 37 CMS
All rotators work.
Ka 50 PVI 800
All buttons can be used, except the brightness.
All displays are sync’ed with DCS.
Ka 50 CMS
All buttons and displays work.
Mirage 2000 C PCN
All buttons can be used except the brightness button.
All displays are sync’ed with DCS, except the markpoints lights (M91-M93).
Mirage 2000 C CMS
All switches work.